Today we will be on a learning adventure, using some basic tools and functions of Affinity Designer, to create a simple and playful “Queen of Hearts” playing card!
How to Create a Queen of Hearts Playing Card With Affinity Designer
Step by step, we’re going to see how to design and create a cute, colorful illustration using basic geometric shapes, in combination with strokes and effects, to custom design our first playing card.
By the end of this tutorial, you’ll be able to tailor your own “Queen of Hearts” playing card and apply the new techniques to create the rest of the deck! If you need extra graphics, head over toGraphicRiverto see what else you can add to the illustration!
1.How to Set Up the Artboard & Guides
We’ll start by setting up our workspace.
Create a poker size playing card document.
- Page Preset:Custom
- Document Units:Millimetres
- Page Width: 63.5 mm
- Page Height: 88.9 mm
- Left Margin:8.2 mm
- Right Margin:8.2 mm
- Top Margin:8.2 mm
- Bottom Margin:8.2 mm
Let’s set up the centre guides.
View > Guides Managerto open theGuides Managerpanel. Select theAdd New Horizontal Guideicon and then theAdd New Vertical Guideicon to create accurate centre guides on the artboard, andClose.
View > Show Margins.
File > Save(Command-S), and name the file “Queen_of_Hearts”. Nowwe are all set up to start adding our artwork!
2.How to Draw the Card Border Design
Let’s start by creating the border around our card. We will draw half the card design and mirror it later.
Select theArtistic Text Tool (T)to add artistic text to the design.Text > Show Character (Command-T).
On the top left corner of the margin, drag theArtistic Text Tool (T), and type in acapital “Q” with a redFill, in27 pt font size.
Then move over to the Effects panel, and apply a dark redInner shadow, with aRadius of9 px.
Next let’s Enable Snapping, so we can make sure all our objects will be positioned and aligned accurately to other objects and the document.To activate/deactivate snapping, clickSnapping(magnet icon) on the main toolbar or the button adjacent to thePresetspop-up menuand check Enable snapping.
From the Tools panel, click and hold theTriangle Toolicon to open a drop-down list of custom shapes. Select theHeart shape tool.
Draw a 6 x 6 mm redheart, below the “Q”. Use the Move Tool (V) to snap the heart 2.1 mm below the letter “Q”. Then, from theEffectspanel, apply a dark redInner shadow, with aRadiusof13 px.
Select theEllipse Tool(M) and adda 1.6 x 1.6 mmorange circle 2.1 mm from the right side of the “Q”.
Duplicate (Command-J)the ellipse and use theMove Tool(V) to snap the duplicate2.1 mmbelow the letter “Q”.
Next let’s draw a heart-shaped corner border.
Select the Pen Tool (P). With the same color used in the ellipse Fill, apply that color on the Stroke, with a 2 ptWidth.
Note: Use the highlighted smart guides measurements to make sure the distance is accurate while drawing.
Start with the right ellipse. Draw a line 37.4 mm horizontally, 7.8 mm downwards, 2.8 mm left, 2.3 mm upwards, 2.3 mm left, 2.8 mm upwards, 7.5 mm right, and down to the centre guide.
Then draw the line from the left circle down to the horizontal centre guide, as shown below.
Let’s edit the corner curves of our line to create the heart shape.
Select theCorner Tool (C) from the toolbar. Select the corner nodes, as shown in the image. Drag the cursor to modify the corner (you will see a red circle, or you can edit the Radius to about1.6 pt, from the Context Toolbar).
Next, select theHeartshape from the toolbar. Draw a2.4 x 2.4 mmredheart. Use the Move Tool (V) to snap it to the right corner of the margin.
Then, use the rotation handle to set the rotation to -45 degrees, or you can rotate from the Transform panel.
In theLayers panel, select all the layers we created, and Group (Command-G). Give the group the title “Border”.
3.How to Create the Queen’s Face
Now let’s create the Queen’s face, starting by drawing a plump, heart-shaped face.
Select theHeartshape tool. Draw a beige filled heart 16.5×15.4 mm, snapped to the centre of the guide.
Select the centre red node at the intersecting edge and pull it upwards so it’s not too curved inwards.
Then, with the Node Tool (A), click on the heart, and from the from theContext Toolbar, clickConvert to Curves, so our object can turn into connected lines and nodes.
So now using theNode Tool(A) and guides, use the nodes to alter the shape of the heart into a more bulgy version, by tweaking the nodes a little further.
Let’s apply an effect on the face.
Layer > Layer Effects….opens the Effects panel.
Apply a Bevel/Emboss:
- Type: Inner
- Radius: 19.7 px
- Soften: 0.4 px
- Highlight: Apply a yellow orange color 75%
- Shadow: Apply a dark orange color 75%
Move on to draw the eyes.
There are a few steps to follow:
- Select the Ellipse Tool (M), and draw a black fill circle 3.5 x 3.5 mm.
- Then with theNode Tool(A), clickConvert to Curves from the Context Toolbar.
- Select the left and right node, and Convert: Sharp.
- After, use the Move Tool (V) to reduce the height by squeezing down the control handles.
- Finally,Rotate it30 degrees, and position it as shown below.
Now let’s continue with the eye illustration, and add makeup.
With theEllipse Tool(M), draw a0.8 x 0.8 mmturquoise circleinside the eye to create some glare. Add another 0.4 x 0.4 mm circle, slightly below the left of the first ellipse.
Second, use the Vector Brush Tool (B), set at 1.4 pt with black stroke, and draw two cute lashes.
From theToolspanel, click and hold theHearticon to open the drop-down list of custom shapes, and select theCrescentshape tool. Draw a black brow, and Rotate -97 degrees, horizontally above the eye.
And finally, use the Pen Tool (P) to manually add in the white eyeshadow.
Now the eyeshadow layer will appear in front of the eye, soMove Back One (Command-[), until it’s behind the eye shape.
In theLayers panel, select all the eye-related elements and Group (Command-G) together.Duplicate (Command-J) the group.
Layer > Transform > Flip Horizontally orclick the Flip Horizontal icon on the Toolbar (blue and gray triangles mirrored).
Position it on the other side, using the Move Tool (V).
Let’s add a nose, lips, neck, and body shape.
Start with the nose, using the Ellipse Tool (M), Width 1 mm and Height 0.3 mm. Use theMove Tool(V) to snap the nose between the eyes.
Use the Heartshape tool for the lips and draw a heart with Width1.3 mmand Height1 mm, and snap it below the nose.
Next, create a white heart of 2.6 x 2.2 mmfor the neck, and snap it at the base of the head shape. Add an orange heart for the headpiece that’s 3.9 x 3.2 mm. Snap it to the middle top of the head.
Finally, for the body shape, we will create a 6.4 x 5.6 mm heart. Move Forward One (Command-]) the layer, over the white heart.
Let’s give our lady some blush on the cheeks.
Take the Ellipse Tool (M). Draw a 10 x 6.5 mm ellipse, and position it below the eyes.Duplicate (Command-J)the ellipse and move the duplicate across to the other cheek, with theMove Tool(V).
Select both ellipses and apply the Add Operationicon to combine them (Layer > Geometry > Add).
After, Duplicate (Command-J) the head shape. Then hold down theShift key, select the duplicated head shape in addition to the cheek ellipses, and click Intersect(Layer > Geometry > Intersect).
The cheeks will inherit the effects applied on the face before. So uncheck Bevel/Embossfrom the Effects panelto release.
From the Layerspanel, apply a Multiply blend mode.
4. How to Design the Hair & Body
Let’s create the hair.
Take the Ellipse Tool (M) and create a dark red ellipse with a size of17 x 13 mm. Give it the following Bevel/Emboss settings from theLayer Effects panel:
- Type: Inner
- Soften: 0.8 px
- Shadow: Multiply inDark red color
Again using the Ellipse Tool (M), create a bright red17 x 7mmellipse.
Select both the first and second ellipse by holding down the Shift key. ApplyAlign Centreand thenAlign Middle. Next,Group (Command-G) the two ellipses together.
Then from theTransform panel, set the rotation angle to50 degrees.
Use theMove Tool(V) to snap the group over the eye, touching the centre guide.
Move Back One (Command-[), so it’s layered behind the head.Duplicate (Command-J) and apply Flip Horizontal from the toolbar.
With theMove Tool(V), position it on the other side.
Moving on, let’s create the back hair bob and add a crown design to it.
First, create a dark red8.2 x 8.8 mm ellipsewith theEllipse Tool(M). For the crown, use the Pen Tool (P), and draw a three-pointed shape as shown below. Use the Node Tool (A) and curve the left, right, and bottom points.
Select the crown and ellipse shape and apply Align Centre, making sure the crown is over the ellipse. Then create a 1.6 x 2.4 mm yellow tear using theTear Tool from the Tools panel. Set theRotation of the tear to140 degrees.
Duplicate (Command-J) the tear and apply the Flip Horizontal icon from theContext Toolbar.Use the Move Tool (V) and position the duplicate on the other side, as shown below.
Once all the elements of the bob are created, Group (Command-G) them together. Apply Move to Back (Command-shift-[).
Let’s add some details to the body.
Select the Diamond Tool from the toolbar. Create a 1.2 x 1.5 mm red diamond and snap it to the centre guide within the black heart.
Duplicate (Command-J), hold down the Shift key to constrain vertically, and drag the duplicate below the other, as shown.
Grab the Triangle Tool from the toolbar, and create a red6.4 x 4.2 mmtriangle, touching the centre guide to the horizontal guide.
Note: To create a shape from the starting point, hold down Option-Command-Drag.
ApplyMove to Back(Command-shift-[).
Now let’s add the Queen’s ruff.
Grab the Ellipse Tool (M) and draw a 22.4 x 18.2 mm turquoise ellipse centre aligned to the centre guide. ApplyMove to Back(Command-shift-[).
Create another18.3 x 18.2 mmellipse, in darker turquoise color. ApplyMove to Back(Command-shift-[) and then Move Forward One (Command-]).
We need to add the Queen’s hands and arms.
Grab the Rectangle Tool (M). Draw a 9.6 x 2.9 mm red brick. Skew the selection from the right by dragging the bounding box control handles upwards.
Then select the Node Tool (A). Apply theConvert to Curves operation, and start curving the lower right side, lift the lower left upwards, and then curve the line to create the Queen’s sleeves.
Use the Move Tool (V) to move the selection onto the body. ApplyMove to Back(Command-shift-[).Duplicate (Command-J)the sleeve.
Layer > Transform > Flip Horizontallyorclick theFlip Horizontalicon on the toolbarto position it on the other side.
Let’s draw the hands
Start with the right-hand side. Select the Heart shape tool from the toolbar. Draw a red 2.4 x 2.5 mm heart.
Then, using the Ellipse Tool (M) with a skintone Stroke of 2.5 pt, draw a 2.4 x 2.4 mm circle, under the heart.
Use the Node Tool(N),select the circle you created, and apply aConvert to Curvesoperation. Then click the two points of the curve where we will cut the top off.
From the Context Toolbar, select theBreak Curveaction, and delete the section as shown below.
Let’s add some fingers.
Select the Pen Tool (P). Use the same skintone Stroke of 2.5 pt applied on the ellipse, and draw three fingers as shown.
Group (Command-G) all the hand elements together. Use the Move Tool (V) to move the new group to the end of the sleeve. ApplyMove to Back(Command-shift-[)
Let’s create the second hand, the fist holding the sceptre.
Select the Pen Tool (P), and draw a line with W: 1 mm and stroke 3 pt, and a slightly darker skin tone.
Duplicate (Command-J)and move it above the other, and then pressCommand-Jagain toPower Duplicate, to create the three fingers.
For the thumb, select the Rectangle Tool (M) and draw a rectangle over the third finger, with a size of1.7 mm x 0.9 mmand a fill in the same skintone used for the other hand.
Draw another in a perpendicular direction, 0.9 x 1.7 mm, on the left edge of the first rectangle, as shown below.
Select both rectangle shapes, and apply theAdd Operationicon to combine orLayer > Geometry > Add.
Then select the Corner Tool (C). Choose the top right corner node, and apply a curve. Choose the base node seen in the image and apply a curve. The thumb is done.
Let’s create the palm of the hand. Select theRounded Rectangle Tooland create a 2.1 x 2.6 mm rectangle in a darker skinshade, from the top finger down to the base. ApplyMove to Back(Command-shift-[).
Group (Command-G) all the hand elements and position it on the edge of the second sleeve.
Let’s add a sceptre.
Use thePen Tool(P) and draw a vertical line 9.2 mm in Height. Give it a dark color stroke. Then select theHeartshape tool, andremember that if you want to create a shape from the center starting point, hold downOption-Command-Drag.
Draw a red4.4 x 4.3mmheart over the line we created.
Let’s add some detail to the sceptre.
Select the Heart tool and apply a darker shade of red. Draw a 1.3 x 1.2 mm heart in the center of the big heart. With the little heart selected, hold down Option-Shift-Drag to copy and paste the selection.
Copy the heart three times below the first, andGroup (Command-G) all the sceptre elements.
Select the hand group and the sceptre group, and Move To Front (Shift-Command-]). Then select the sceptre group and Move Back One (Command-[).
Let’s finish up.
Group (Command-G) all the Queen’s parts.
Select the ‘Border’ layer and the Queen’s group, and thenLayer > Transform > Flip Horizontallyorclick theFlip Horizontalicon on thetoolbar, and thenFlip Vertically.
Snap to the centre guide, and we are ready to play!
You’ve Played Your Cards Right!
Great job! Our “Queen of Hearts” playing card is complete. I hope you’ve enjoyed following this nice and easy tutorial. Perhaps you learned some interestingnewtips and tricks, to inspire you to create the rest of the deck!
I hope you’ve managed to follow each and every step. Have fun, and post your card designs in the comments area below.
Enjoy and keep creating!